Machine Specifications
Performance Expectations
Each machine ships with a Certificate of Inspection, which details quality assurance measurements performed by members of our quality assurance team prior to shipping.
Cutting Performance
This machine is capable of cutting a wide variety of materials (for information, see Intended Use) at or near their recommended feeds and speeds. Make sure that your workpiece is held as rigidly as possible and use the most rigid tooling available for roughing cuts. Verify that the programmed operations do not exceed the available spindle power.
Spindle Speed Range
Two speed ranges are available:
Low 70 rpm to 2000 rpm
High 250 rpm to 10,000 rpm
Spindle Power Rating 2 hp (1.5 kW)
Maximum Feed Rate
X- and Y-Axis 300 IPM (2.7 m/min)
Z-Axis 230 IPM (2.2 m/min)
Resolution and Accuracy
Accuracy is heavily influenced by the techniques that the machinist uses. A skilled machinist can deliver accuracy that exceeds the specified accuracy from the manufacturer; an inexperienced machinist may have difficulty delivering the specified accuracy. We can't predict operator accuracy, but the specified accuracy is an important reference point.
Resolution 0.0001"
NOTE: The resolution of motion is the minimum discrete positional move.
Ball Screw Positional Accuracy ≤ 0.0006 in./ft
Positional Accuracy ≤ 0.0013 in./ft
NOTE: The positional accuracy includes additional contributing factors (like compressibility of bearings, ball screw windup, and friction).
Machine Specifications
Travels | |
X-Axis | 18" (457 mm) |
Y-Axis | 11" (279 mm) |
Z-Axis | 16.25" (413 mm) |
Spindle-to-Table Maximum Clearance | 18" (457 mm) |
Spindle Centerline to Machine Column | 11" (279 mm) |
Spindle | |
Spindle Power | 2 hp (1.5 kW) |
Spindle Maximum Speed | 10,000 rpm |
Transmission | Poly-V Belt |
Spindle Taper | BT30 |
Thread Machining | Tension/Compression, Rigid Tapping, Thread Mill |
Maximum Feed Rate | |
X- and Y-Axis | 300 IPM (2.7 m/min) |
Z-Axis | 230 IPM (2.2 m/min) |
Axis Motor | Servo Driven |
Power | |
Primary Power Required | Single-Phase 230 Vac, 50/60 Hz |
Recommended Circuit Amperage | Dedicated 20 A breaker |
Table | |
Table Size | 34" × 9.5" (864 mm × 241 mm) |
T-Slot Size | 5/8" (15.9 mm) (three slots) |
Maximum Weight on Table | 500 lb (181 kg) |
Overall Dimensions | |
Machine Size | 69" × 56" (1.8 m × 1.4 m) |
Overall System Height | 96" (2.4 m) |
Typical System Weight | 1600 lb (726 kg) |
Looking for more information?
This is a section of the 1100MX operator's manual. To view the whole manual, go to Tormach document UM10586.
If you have additional questions, we can help. Create a support ticket with Tormach Technical Support at tormach.com/how-to-submit-a-support-ticket for guidance on how to proceed.